AA- Preliminary Instructions
Strider Link Series
SRFStrider-161004A-REV.A
Sinteck Sistemas Eletrônicos Ltda.
This manual is written as a general guide for those having previous knowledge and
experience with this kind of equipment, well conscious of the risks connected with
the operation of electrical equipment.
It is not intended to contain a complete statement of all safety rules which should be
observed by personnel in using this or other electronic equipment.
The installation, use and maintenance of this equipment envolve risks both for the
personnel performing them and for the device itself, that shall be used only by
trained personnel.
Sinteck Nextt doesn’t assume responsibility for injury or damage resulting from
improper procedures or practices by untrained personnel in this handling of this unit.
Please, observe all local codes and fire protection standards in the operations of this
unit.
Warning: always disconnect power before opening covers or removing any
part of this unit.
Use appropriate grounding procedures to short out capacitors and high
voltage points before servicing.
Warning: this device can irradiate radio frequency waves, and it’s not installed
following the instructions contained in the manual and local regulations it
could generate interferences in radio communications.
This is a “ Class A” equiment. In the residential place this equipment can
cause hash. In this case can be requested to user to take the necessary
measures.
Sinteck Nextt reserves to the right to modify the design and/or the technical
specifications of the product and this manual without notice.
P/04
To Next Page
Loading...