Sinteck RPU Link - 3-9 Transmitter Contrast Adjustment; 3.9 Adjusting Transmitter Display Contrast

3-9 Quick guide for installation and use - Strider Transmitter Link
Strider Link Series
SRFStrider-161004A-REV.A
Sinteck Sistemas Eletrônicos Ltda.
CONTRAST CHANGING
To change the contrast level on the Strider Transmitter Link is necessary to press the button
“UP” or “DOWN”on the front panel, once the message “CONTRASTADJUST” is shown.
CONTRAST ADJUST
LEVEL~ 05
CONTRAST ADJUST
LEVEL~ 05
3
CONTRAST ADJUST
LEVEL~ 05
CONTRAST ADJUST
LEVEL~ 05
CONTRAST ADJUST
LEVEL~ 05
CONTRAST ADJUST
LEVEL~ 05
03/P/28