Snifter mA+ EX RF User Manual 21
11.2 DustLog
DustLog software starting from version 8, is a commercial product intended to
meet real time data acquisition, storage and reporting needs for all Sintrol
products and a variety of applications. DustLog software covers all the easy to use
features available in the complementary DustTool software.
We recommend the use of Dustlog software for:
• comprehensive data storage
• data export option to third party software (f.ex. MS Excel)
• measurement history and reporting functionality
• history based calibration actions
• offsite data storage into multiple supported database servers.
• in the need of real time virtual signals and alarms
• when setting up or managing the whole measurement networks of
o multiple different instruments
o multiple different physical connections (RF or wires) within the
same installation.
• professional real time monitor views from a number or different
measurement points with powerful visualization and grouping options.
A wide range of reports can be generated to see historical trends in the
measurement with the ability to generate monthly, daily or hourly averages
charted on self-explaining graphs. Additionally, the easy user interface gives the
plant the full control of the device's parameters so they can be read, sent or
configured directly from the control room. After installation of the monitor, all
access to the monitor controls can be done remotely using the Dustlog 8.
Further information regarding functionalities and costs of DustLog 8 can be
obtained by our local distributors or under http://www.sintrolproducts.com
To Next Page
Loading...