Snifter mA+ EX RF User Manual 17
11 Appendix A: Sintrol PC software
The instrument can be controlled with Sintrol PC software provided they have
appropriate bus interface available.
11.1 DustTool
DustTool is complementary software to help you to get easily control of the
parameters and features of your Sintrol products.
The hardware requirements to run the software are:
• Windows XP, Vista or 7
• Screen resolution of 1024x768 pixels or more
• Minimum memory or 512 MB
The DustTool PC-software can be connected directly to the meters via USB. By
using converter also connections over RS 485 and RF are supported.
NOTE:
When customer uses PC-software to lock the device with lock password feature,
changing any device parameters and running auto-setup is disabled. If this
password is set and lost, there is no way to unlock the device without contacting
the manufacturer for the device specific master password.
Preview
When DustTool software opens it looks for USB-connected Sintrol products. In case
any products are connected, they will appear within the software and can directly
be managed.
The main view of the software is illustrated below.
To Next Page
Loading...