Need help?Do you have a question about the SINUS Tango Plus and is the answer not in the manual?
General| Type | Sound Level Meter |
|---|---|
| Data Logging | Yes |
| Display | LCD |
| Resolution | 0.1 dB |
| Frequency Range | 31.5 Hz to 8 kHz |
| Measuring Range (Sound) | 30 - 130 dB |
| Standards | IEC 61672-1 Class 2 |
| Microphone | 1/2" Electret Condenser Microphone |
Details power options, battery types, and the procedure for replacing batteries.
Guides on the initial steps for using the Tango_Plus device for the first time.
Explains the various sound level metrics and spectral data that can be calculated.
Instructions for installing the Tango_Plus driver and Tango-Utilities software on a PC.
Details manual configuration settings for measurement, calibration, display, and storage.
Guides on performing measurements, handling overload/underrange, and viewing/printing results.
To Next Page
