SIP 01594 User Manual

36
FOR HELP OR ADVISE ON THIS PRODUCT PLEASE CONTACT YOUR DISTRIBUTOR,
OR SIP DIRECTLY ON:
TEL: 01509500400
EMAIL: sales@sip-group.com or technical@sip-group.com
www.sip-group.com
Ref: 100813
Please dispose of packaging for the product in a responsible
manner. It is suitable for recycling. Help to protect the
environment, take the packaging to the local amenity tip and
place into the appropriate recycling bin.
Never dispose of electrical equipment or batteries in with your
domestic waste. If your supplier offers a disposal facility please
use it or alternatively use a recognised re-cycling agent. This
will allow the recycling of raw materials and help protect the
environment.
1
12” Metal Cutting Bandsaw
Please read and fully understand the instructions in this manual
before operation. Keep this manual safe for future reference.
01594 & 01595

SIP 01594 Specifications

General

Brand	SIP
Model	01594
Category	Saw
Language	English

Summary

Declaration of Conformity

Safety Instructions

Electrical Connection

Connecting to 1 Phase Power Supply

Details connecting the bandsaw to a standard 230V, 13 amp power supply.

Connecting to 3 Phase Power Supply

Explains how to connect the 3-phase bandsaw, usually hard-wired.

Technical Specification

Getting to Know Your Bandsaw

Wiring Diagram

Troubleshooting

Assembly Instructions

Unpacking

Instructions for safely removing the bandsaw from its packaging.

Fitting the Wheels

Guides the user through attaching the wheels to the bandsaw.

Operating Instructions

Setting the Blade Speed

Explains how to adjust the bandsaw's blade speed for different materials.

Operating the Vice

Hydraulic Cylinder Adjustment

Cutting with the Bandsaw

Step-by-step guide for performing cutting operations.

Maintenance Instructions

Changing the Blade

Tensioning the Blade