SIP Migmate 130 - User Manual

Migmate 130 conversion to DP version
The gas and dual purpose of the Migmate are almost the same and share 90+ % of their parts see diagram
below.
Gas version DP version
The main area of visual difference is to the front panel, the gas version has a cable clamp to hold the captive
earth return lead and a blanking plug, in the DP version the place of these two is taken by a pair of 10-
25mm Dinse sockets, the sockets are connected to the choke output and the +ve plate of the rectifier.
Gas version DP version
Note: conversion will involve the opening of the machine, it should only be performed by electrically
competent person.

Summary

Migmate 130 Conversion Overview

Gas vs DP Version Comparison

Compares gas and dual purpose Migmate models, highlighting shared parts and general differences.

Front Panel Visual Differences

Details the main visual distinctions on the front panel between gas and DP versions.

Conversion to DP

Parts Required for DP Conversion

Lists all necessary parts and terminals for converting the welder to the DP version.

DP Conversion Procedure

Provides a detailed, step-by-step guide for performing the DP conversion on the welder.

Conversion to Gasless

Parts Required for Gasless Conversion

Lists all necessary parts and terminals for converting the welder to the gasless version.

Gasless Conversion Procedure

Provides a detailed, step-by-step guide for performing the gasless conversion on the welder.

Component Visual Guides

Rectifier Plate Modifications

Illustrates changes to the rectifier plate before and after conversion procedures.

Choke Component Changes

Shows the state of the choke component before and after gasless/gas conversions.

Assembly and Routing Details

Torch Connection Point

Highlights the brass threaded section of the torch for cable connections.

Torch Link Cable Routing

Demonstrates the correct path for the new torch link cable on the machine.

Connector Information

Dinse Plugs and Sockets Explained

Explains the function, types, and connection method of Dinse plugs and sockets.

SIP Migmate 130 Specifications