SIP T126 User Manual

36
FOR HELP OR ADVISE ON THIS PRODUCT PLEASE CONTACT YOUR DISTRIBUTOR, OR
SIP DIRECTLY ON:
TEL: 01509500400
EMAIL: sales@sip-group.com or technical@sip-group.com
www.sip-group.com
Ref: 010814
Please dispose of packaging for the product in a responsible
manner. It is suitable for recycling. Help to protect the
environment, take the packaging to the local amenity tip
and place into the appropriate recycling bin.
Never dispose of electrical equipment or batteries in with
your domestic waste. If your supplier offers a disposal facili-
ty please use it or alternatively use a recognised re-cycling
agent. This will allow the recycling of raw materials and help
protect the environment.
1
Please read and fully understand the instructions in this manual
before operation. Keep this manual safe for future reference.
05710, 05736, 05756
MIG Welder
T126, T136 & T166

SIP T126 Specifications

General

Brand	SIP
Model	T126
Category	Welding System
Language	English

Summary

Safety Symbols Guide

Symbol Definitions

General Safety Instructions

Pre-Operation and Work Area Safety

Guidelines for checking the welder and maintaining a safe work environment.

Advanced Safety Precautions

Equipment Usage and Electrical Safety

Safety advice on storage, PPE, maintenance, accessory use, and electric shock prevention.

Safety Instructions: Hazardous Environments

Environment and Repair Safety Guidelines

Safety guidelines for hazardous environments and proper repair procedures.

Safety Instructions: Electrical and Fire Hazards

Electric Shock and Fire Prevention Measures

Detailed instructions on avoiding electric shock and preventing fires during welding operations.

Safety Instructions: Heat, Glare, and Burns

Heat, Glare, Burn, and Container Safety

Precautions regarding heat, glare, burns, container safety, and explosive atmospheres.

Safety Instructions: Ventilation and Confined Spaces

Ventilation Requirements and Gas Safety

Guidelines for adequate ventilation, managing toxic gases, and safety in confined spaces.

Safety Instructions: General Usage and Material Hazards

General Welding Practices and Material Hazards

Wiring Diagram: Weldmate T166 MIG

Wiring Diagram: Weldmate T136 MIG

Electrical Connection Procedures

Power Supply Connection and Wiring

Instructions for connecting the welder to the power supply, including plug wiring and safety.

Electrical Connection Safety Notes

Electrical Connection Warnings and Guidance

Safety warnings regarding plug fitting, mains supply voltage, and extension lead usage.

Wiring Diagram: Weldmate T126 MIG

Troubleshooting Guide

Troubleshooting Flowchart and Advice

Step-by-step guide to diagnose and resolve common welding machine problems.

Technical Specifications

Weldmate Model Specifications Comparison

Maintenance Procedures

Welder Cleaning and Care

Operating Instructions: Welding Process

Welding Preparation and Execution

Guide to preparing the work area, setting controls, and performing the welding operation.

Operating Instructions: Wire Feed System

Wire Spool Fitting and Feeding Procedure

Instructions for fitting the wire spool, checking rollers, and feeding the wire through the torch.

Operating Instructions: Gas and Polarity

Gas Selection for T136/T166 Models

Polarity Settings for T136/T166 Models

Assembly Instructions

Welding Mask and Handle Assembly

Assembly Instructions: Miscellaneous Fittings

Gas Hose, Bottle Bracket, and Mains Lead Installation

Operating Instructions: Power Settings

Weldmate T126 Power Setting Adjustment

Operating Instructions: Wire Feeding

Wire Feed Roller and Tension Adjustment

Operating Instructions: Welding Process Steps

Initiating and Executing a Weld

Maintenance and Care

Regular Cleaning and Component Checks

Tip, Shroud, and Liner Maintenance