SIP Weldmate HG2500P User Manual

32
Ref: 081215
Please dispose of packaging for the product in a responsible
manner. It is suitable for recycling. Help to protect the
environment, take the packaging to the local amenity tip and
place into the appropriate recycling bin.
Never dispose of electrical equipment or batteries in with your
domestic waste. If your supplier offers a disposal facility please
use it or alternatively use a recognised re-cycling agent. This will
allow the recycling of raw materials and help protect the environ-
ment.
FOR HELP OR ADVICE ON THIS PRODUCT PLEASE CONTACT YOUR DISTRIBUTOR,
OR SIP DIRECTLY ON:
TEL: 01509500400
EMAIL: sales@sip-group.com or technical@sip-group.com
www.sip-group.com
1
Please read and fully understand the instructions in this manual
before operation. Keep this manual safe for future reference.
05770
Weldmate HG2500P AC/DC
Tig/Arc Inverter Welder
With Pulse

SIP Weldmate HG2500P Specifications

General

Input Voltage	230V
Max Output Current	250A
Duty Cycle	60%
Protection	IP21
Output Current	250A
Welding Current	40-250A
Wire Diameter	0.6 mm - 1.0 mm
Current Range	40-250A
Electrode Size	2.0 mm - 4.0 mm

Summary

Declaration of Conformity

Safety Instructions

Safety Symbols

General Safety Precautions

Basic safety measures for operating the welder, including reading instructions and checking parts.

Electrical Safety

Protects against electric shock by avoiding earthed items and using RCDs.

Maintenance Safety

Environmental Safety

Warns against operating in dangerous or explosive environments.

Wet Condition Precautions

Avoids operating the welder in wet conditions due to increased shock risk.

Repair and Modification Safety

Emphasizes repairs by qualified persons and not modifying the welder.

Arc Ray Protection

Protects eyes and skin from UV/IR rays by using a welding mask.

Ventilation Requirements

Ensures adequate ventilation to remove welding smoke, fumes, and toxic gases.

Chlorinated Solvent Vapors

Warns against welding where chlorinated solvent vapors can form toxic phosgene.

Getting to Know Your Welder

Control Panel Overview

Welding Parameters Explained

Electrical Connection

Power Supply Requirements

Ensures safe connection to the power supply, checking plugs, cables, and using RCDs.

Troubleshooting