SIP Tempest TP550/206 - User Manual

28
FOR HELP OR ADVICE ON THIS PRODUCT PLEASE CONTACT YOUR DISTRIBUTOR,
OR SIP DIRECTLY ON:
TEL: 01509500400
EMAIL: sales@sip-group.com or technical@sip-group.com
www.sip-group.com
Please dispose of packaging for the product in a responsible
manner. It is suitable for recycling. Help to protect the
environment, take the packaging to the local amenity tip
and place into the appropriate recycling bin.
Never dispose of electrical equipment or batteries in with
your domestic waste. If your supplier offers a disposal facili-
ty please use it or alternatively use a recognised re-cycling
agent. This will allow the recycling of raw materials and help
protect the environment.
Ref: 070515
1
Tempest
TP550/206
Petrol Pressure Washer
08918
Please read and fully understand the instructions in this manual
before operation. Keep this manual safe for future reference.

SIP Tempest TP550/206 Specifications

General

Brand	SIP
Model	Tempest TP550/206
Category	Pressure Washer
Language	English

Summary

Declaration of Conformity

Safety Symbols

Hazard Symbols

Symbols indicating danger, warning, fumes, and flammability risks.

Informational Symbols

Symbols for supplementary notes and hot surface warnings.

Safety Instructions

Guarantee

Technical Specifications

Troubleshooting

Maintenance Instructions

Changing the Engine Oil

Procedure for changing the engine oil every 50 hours of use.

Clean or Replace Air Filter

Steps for cleaning or replacing the air filter every 50 hours of use.

Clean or Replace Spark Plug

Procedure for cleaning or replacing the spark plug every 50 hours of use.

Operating Instructions

Using Detergent

Instructions for using the detergent function with the correct nozzle.

Connecting to Water Supply

Guidance on connecting the pressure washer to a water supply.

Fitting the Detergent Hose

Simple steps to attach the detergent hose to the inlet.

Filling the Crankcase with Oil

Stopping the Pressure Washer

Filling the Pump with Oil

Filling the Pressure Washer with Fuel

Fitting; Changing Nozzles

Starting the Engine