Sirman TC 22 - Controls and Indicators; Control Panel Overview; Testing, Transport, Delivery and Installation; Factory Testing Procedures

15
English
4 - Testing, transport, delivery and installation
4.1 - Testing
The machine in your possession has been tested at our factory to ensure its smooth oper
ation
and proper adjustment. During this testing, tests were conducted in operation on material
similar to that processed by the user.
4.2 - Delivery and handling of the machine
All the material shipped has been thoroughly checked before delivery to the carri-er. Unless
otherwise agreed with the customer, the machine is wrapped with nylon and strapped onto a
pallet; the carton sheathes it from above which will also be strapped on the pallet. Upon
receipt of the machine, verify the integrity of the pack-aging. If the packaging is damaged, the
carrier must sign the bill of receipt with a note such as " Accepted, with reservation ..." and
reason.
After opening the package, if damaged machine parts are present, make a claim to the carrier
within three days of the date indicated on the documents .
4.3 - Installation
WARNING! The area where you plan to install the machine must be level, solid and on a flat
shoring and must ensure its support in safety. The machine must also be placed so as to
maintain ample space around it. This allows greater manoeu-vrability in the work stages and
ensures access for subsequent maintenance. Pro-vide suitable lighting around the machine to
ensure proper visibility to the operator using the machine.
- emove the cellophane wrapping of the machine and any other packaging inside.
4.3.1 - Disposal of packaging
The packing materials such as cardboard, nylon, and wood products are compara-ble to
municipal solid waste. They can then be disposed of freely. The nylon mate-rial is a pollutant
that produces toxic fumes if burned. Do not burn and do not dis-perse but dispose of according
to applicable laws. If the machine is delivered in countries where there are special rules,
dispose of the packaging as required by the applicable legislation .
Fig. 3.1.1
3
6
2
5
4
1
3 -
Controls and Indicators
3.1 - List of controls and indicators
1 - Start button - Press to start the machine.
2 - Stop button - Press to stop the machine.
3 - Push button for reverse - Allows you to change
the direction of rotation of the rotor pulses..
4 - 5 - 6 - Lights