Sirona C8+ User Manual

ATTENTION!
Patient simulator must be able to move "FREELY".
There must be no obstacles in the travel range!
Simulation workstation brief operating instructions
+
C8
Control panel on the dentist element
Main device switch ON (I)/OFF (0)
Motor speed controller/SIROSONIC L intensity
Spray instrument control
Motor rotation clockwise/counter-clockwise
Motor speed display/SIROSONIC L intensity
I
O
P
1
2
S
0
ENDO
100
1
20
40
60
80
B
C
D
A
B
C
D
A
A
C
D
B
B
A
B
A
D
F
E
C
L
"Patient simulator" mechanical setting
K
P
B
P
1
2
S
0
ENDO
100
1
20
40
60
80
I
E
A
D
C
G
H
P1
P1
1
2
3
A
B
C
1
0
I
3
2
M
K
J
I
L
F
Operation light ON/OFF
G
Composite ON/OFF
H
Pneumatic foot switch
1 Start instruments
2 Spray ON/OFF
3 Chip Blower
I
Option: Foot switch, can be controlled electrically
1 Foot pedal for speed control during speed foot control functions
2 Instrument spray ON/OFF
3 Chip blower on the treatment instrument
J
Configuration on the highspeed handpiece
1. Remove motor è An LED on lights up
2. Remove motor hose – attach highspeed handpiece hose
3. Press button for > 10s
4. All LEDs on light up (configured on highspeed handpiece)
E
F
E
Configuration on the motor
1. Remove highspeed handpiece è All LEDs on light up
2. Remove highspeed handpiece hose – attach motor hose
3. Press button for > 10s
4. An LED on lights up (configured on motor)
E
F
E
1. Tilt adjustment: Release "tilt" clamping lever (A)
Tilt patient simulator to the desired position
Re-secure clamping lever
2. Rotation: Release "rotation" clamping lever (B) Rotate
patient simulator into the desired position
Re-secure clamping lever
3. Height adjustment: Press to release locking lever (C)
Move patient simulator into the desired position
Re-secure clamping lever
"Patient simulator" electrical setting
L
1. Tilt adjustment: Press the button (C or D) on the dentist
element or the 4-way foot switch (C or D)
è Patient simulator tilted DOWN/UP
2. Rotation (mechanical): Release "rotation" clamping lever (B)
Rotate patient simulator into the desired position
Re-secure clamping lever
3. Height adjustment: Press the button (A or B) on the dentist
element or the 4-way foot switch (A or B)
è Patient simulator DOWN/UP
Adjusting the articulating headrest
M
Tilt the headrest backward using the locking button (A)
Tilt the headrest forward by simply pulling it out

Sirona C8+ Specifications

General

Model	C8+
Manufacturer	Sirona
Lighting	LED with adjustable intensity
Operating Modes	Multiple programmable settings
Spittoon Bowl	Integrated, easy-to-clean design
Assistant Element	Available with assistant element
Integrated Multimedia	Optional integrated multimedia system with monitor
Cuspidor	Integrated with spittoon bowl
Compressed Air	Integrated compressed air system
Suction System	Integrated suction system
Dimensions	Varies by configuration
Weight	Varies by configuration
Power Requirements	Varies depending on configuration

Summary

Simulation Workstation C8 Components and Operation

Main Device Controls

Overview of main device switches, control panel, speed, spray, and light controls.

Foot Switch Operation

Instructions for using pneumatic and optional electric foot switches for instrument control.

Patient Simulator Setup and Adjustment

Handpiece and Motor Configuration

Steps to configure the highspeed handpiece and motor for proper operation.

Mechanical Patient Simulator Adjustments

Adjusting patient simulator tilt, rotation, and height using mechanical levers.

Electrical Patient Simulator Adjustments

Adjusting patient simulator tilt, rotation, and height using electrical buttons.

Patient Simulator Movement Safety

Ensure patient simulator moves freely without obstacles for safe operation.

Articulating Headrest Adjustment

Headrest Adjustment Procedure

How to tilt the headrest backward or forward using the locking button.

Quick Maintenance and Cleaning

Cleaning Approved Agents

Use only Sirona-approved cleaning agents for all workstation components.

Instrument Hose and Rack Care

Refer to specific instructions for care of motors, handpieces, and instrument rack.

Suction System Disinfection

Instructions for wipe disinfection of suction handpieces and saliva ejectors.

Foot Switch Cleaning

Wipe the foot switch with a damp cloth and place it in the bracket daily.