To Next PageTo Next Page
Need help?Do you have a question about the Sirona CEREC MC XL and is the answer not in the manual?
General| Brand | Sirona |
|---|---|
| Model | CEREC MC XL |
| Category | Medical Equipment |
| Language | English |
Explains warning symbols like DANGER, WARNING, CAUTION, NOTICE, IMPORTANT.
Describes document formatting and symbols used for instructions.
Clarifies what "PC" refers to in the document.
Instructs on how to safeguard warranty claims.
Details CE and GOST marks and applicable standards.
Defines the purpose and restrictions for using the unit.
Covers prerequisites, maintenance, repair, and product modification safety.
Warns about instruments running when the door is open and how to stop them.
Prohibits mobile wireless phones to ensure safe operation.
Discusses potential issues with wireless data transmission and alternatives.
Provides instructions for safe transport and unpacking of the unit.
Advises on proper disposal of packaging materials according to regulations.
Specifies requirements for the unit's installation location and environment.
Covers the steps for the first-time startup and configuration.
Provides an overview of the unit's components and ports.
Lists and describes standard accessories like instruments and calibration pins.
Details the functions and layout of the unit's touch display.
Explains the meaning of different lighting colors in the milling chamber.
Guides on how to properly insert the milling chamber sieve.
Explains how to connect the bar code reader.
Details the installation procedures for connecting the unit.
Describes connecting the unit to a PC using a LAN cable.
Instructions for connecting the unit to the electrical power supply.
Guides on establishing a wireless connection to the PC.
Details how to operate multiple units simultaneously via an access point.
Instructions for connecting via a wireless H&W interface.
Step-by-step guide for filling the unit's water tank.
Explains the procedure for turning the unit on and off.
Instructions for repacking the unit, ensuring it is drained.
Refers to a document detailing the items included in the unit's package.
Provides guidelines for storing the unit properly.
Details how to configure various settings for the milling unit.
Guides through the process of calibrating the milling unit.
Explains the steps involved in the milling production process.
Describes how to input bar codes for material identification.
Details the procedure for manually fixing the material block.
Provides instructions for regularly changing the cooling water.
Details information about the instruments used with the unit.
Lists approved agents for unit care and cleaning.
Guides on how to clean the unit's exterior surfaces.
Explains the procedure for replacing the main fuses.
Step-by-step guide for changing the unit's filter inserts.
Instructions for draining water from the unit for transport or long-term storage.
Describes how to use the tank cap opener for various parts.
Outlines the software and hardware requirements for the unit.
Provides general technical details about the milling unit.
Outlines the steps for disposing of the unit according to regulations.
Specific disposal instructions for Germany, including contacting enretec GmbH.
General advice for disposal outside of Germany, contacting local specialists.
