Need help?Do you have a question about the Sirona DAC UNIVERSAL and is the answer not in the manual?
General| Sterilization Temperature | 134°C |
|---|---|
| Weight | Approx. 24 kg |
| Compatibility | Compatible with standard dental instruments |
| Water Quality | Requires distilled or demineralized water |
| Compliance | Complies with EN 13060 and ISO 17665 standards |
Provides contact details for Sirona Customer Service Center and manufacturer information.
Emphasizes reading operating instructions and safety information before use.
Explains the differences between DAC UNIVERSAL ADVANCED and STANDARD models.
Details the warranty period, coverage, and exclusions for the DAC UNIVERSAL.
Specifies the intended applications and instruments for the DAC UNIVERSAL.
Lists materials and devices not suitable for reprocessing in the DAC UNIVERSAL.
Lists the parts included in the DAC UNIVERSAL delivery.
Explains electrostatic discharge risks and protective measures for electronic components.
Identifies and explains warning symbols found on the DAC UNIVERSAL unit.
Warns against using the device with flammable anesthetics or gases.
Provides precautions to avoid burns from hot surfaces or steam during operation.
Specifies that personnel must be instructed by trained technicians.
Details requirements for the installation location to prevent injury.
Describes the core functions of the DAC UNIVERSAL for instrument reprocessing.
Details the reprocessing capabilities using the STANDARD lid.
Describes reprocessing unwrapped solid instruments with the BASKET lid.
Details cleaning and thermal disinfection of specific instruments using the FLEX lid.
Provides an overview of the device's components and their functions.
Lists the technical specifications and dimensions of the DAC UNIVERSAL.
Shows process overviews with temperature and pressure levels over time.
Addresses electromagnetic interference and compliance standards.
Specifies environmental and location requirements for safe installation.
Details the necessary connections for power, air, and water.
Explains how to attach instruments to the STANDARD and FLEX lids.
Describes how to connect printers or data loggers for cycle documentation.
Overview of routine tasks required for operating the DAC UNIVERSAL ADVANCED.
Details the procedure for using chemical indicators for batch testing.
Explains how to use a PCD device to simulate steam penetration.
Guides users through the device's menu and display interface.
Provides an overview and navigation guide for the device's menu system.
Step-by-step instructions for reprocessing instruments with the STANDARD lid.
Instructions for reprocessing solid instruments using the BASKET lid.
Details on sterilizing wrapped instruments using the WRAPPED lid.
Instructions for cleaning and disinfecting instruments with the FLEX lid.
Procedure to test oil flow to the chamber for correct instrument lubrication.
Procedure to test water flow to the chamber for correct instrument operation.
Instructions for emptying the water tank via menu or hose.
Steps for cleaning the water tank and its components.
Procedure for cleaning the drain filter.
Guide for checking and maintaining instrument adapters and O-rings.
Information on scheduled maintenance by a qualified technician.
Lists display messages, pictograms, descriptions, and corrective actions.
Describes common errors that do not display a specific message.
Instructions for resetting the device in specific error situations.
Overview of routine tasks for operating the DAC UNIVERSAL STANDARD.
Procedure for using chemical indicators for batch testing.
Explains how to use a PCD device for steam penetration testing.
Guides users through the device's menu and display interface.
Provides an overview and navigation for the device's menu system.
Details default settings and how to reset the device's menu.
Step-by-step instructions for reprocessing instruments with the STANDARD lid.
Instructions for reprocessing solid instruments using the BASKET lid.
Details on sterilizing wrapped instruments using the WRAPPED lid.
Instructions for cleaning and disinfecting instruments with the FLEX lid.
Procedure to test oil flow to the chamber for correct instrument lubrication.
Procedure to test water flow to the chamber for correct instrument operation.
Instructions for emptying the water tank via menu or hose.
Steps for cleaning the water tank and its components.
Procedure for cleaning the drain filter.
Guide for checking and maintaining instrument adapters and O-rings.
Instructions for changing the drain filter.
Lists display messages, pictograms, descriptions, and corrective actions.
Describes common errors that do not display a specific message.
Instructions for resetting the device in specific error situations.
Lists and describes various adapters for the STANDARD lid.
Lists and describes various adapters for the FLEX lid.
Information on the use of NitraClean tablets for cleaning.
Technical data and output information for the printer accessory.
Catalog of spare O-rings and adapter parts for maintenance.
Guidelines for the environmentally friendly disposal of electrical devices.
To Next Page
