Sirona M1+ User Manual

båÖäáëÜ
`O
H
I=jN
H
`~êÉ=~åÇ=ÅäÉ~åáåÖ=áåëíêìÅíáçåë=Ñçê=íÜÉ=éê~ÅíáÅÉ=íÉ~ã

Sirona M1+ Specifications

General

Model	M1+
Type	Dental Milling Machine
Manufacturer	Dentsply Sirona
Milling Materials	PMMA, composite resins
Milling Time	Varies based on material and restoration type
Connectivity	Ethernet

Summary

Vacuum system

3.1 Care

3.2 Disinfection with a dry suction system

Daily disinfection procedure for dry suction systems.

3.3 Disinfection with a wet suction system

Daily disinfection procedure for wet suction systems.

3.4 Suction handpieces

Sterilization, thermodisinfection, disinfection, and weekly care of suction handpieces.

3.5 Cleaning the suction hoses

Procedure for cleaning suction hoses and filter housings.

3.6 Thermodisinfecting the suction hoses

Procedure for thermodisinfecting specific suction hoses.

Amalgam separation

4.1 Replacing the amalgam separator

Step-by-step guide for replacing the amalgam separator.

4.2 Cleaning the siphon

Instrument hoses

5.1 Removal/Replacement of instrument hoses

5.2 Checking the flow rate of the SPRAYVIT L

Procedure to check SPRAYVIT L water flow rate for safety.

Disinfection system

6.1 Microbiological water test

How to perform a water test to check bacterial contamination.

6.2 Purge/Auto Purge function (purging the water paths)

6.3 Sanitation

Procedure for periodic sanitation of water paths.

Checking the safety switches

Periodic safety switch checks

Instructions for checking chair/backrest movement safety stops every 6 months.