Sirona DAC UNIVERSAL - Start Cycle on the STANDARD Lid DAC UNIVERSAL

60 53 362 D3472
174 D3472.201.10.20.02 07.2016
8Operation DAC UNIVERSAL STANDARD Sirona Dental A/S
8.3Reprocessing with DAC UNIVERSAL STANDARD Operating Instructions DAC UNIVERSAL
8.3.2.2
Start cycle on the STANDARD lid DAC UNIVERSAL STANDARD
✔ All settings of the DAC UNIVERSAL were preset according to
"Regular activities [ → 153]".
✔ The DAC UNIVERSAL is switched on and ready for operation.
✔ The maximum number of 6 instruments are ready for reprocessing.
✔ The STANDARD lid is at hand.
1. Remove the STANDARD lid from the holder on the DAC
UNIVERSAL.
2. Place the STANDARD lid on the counter or put it in the optional lid
holder.
3. Plug each instrument onto the corresponding adapter in the
STANDARD lid. See "General placement of instruments DAC
UNIVERSAL STANDARD [ → 172]" for more information on attaching
the instruments. The adapters can be replaced if necessary, see
"Mounting adapters [ → 53]".
4. Attach a Class 5/6 chemical indicator in the STANDARD indicator
holder in the groove on the center post of the STANDARD lid or
attach the PCD test device onto the ISO/INTRAmatic adapter. See
"Checking the reprocessing result with an indicator / PCD test device
[ → 153]" for more information on using the chemical indicator / PCD
test device.
5. Insert the STANDARD lid in the cover holder of the DAC UNIVERSAL
in such a way that the instruments are pointing down.
 There are instruments on the STANDARD lid; the DAC
UNIVERSAL is still open and ready for a cycle.
6. Press the "Menu/Enter"-Key twice and select the desired program
using the arrow keys.
7. Confirm your input by pressing the "Menu/Enter"-Key again.
8. Press the "Clear"-Key.
WARNING
The instruments may not be wrapped when using the STANDARD lid,
as cleaning, lubrication, and sterilization would then fail.
IMPORTANT
Do not start the DAC UNIVERSAL without a lid inserted into the lid
holder.
NOTICE
Make sure that the lid is inserted all the way into the holder so that the
instrument heads do not touch the wall of the chamber. Make sure there
are no objects in the chamber.
NOTICE
The DAC UNIVERSAL and/or the instruments can be damaged if a lid
is not inserted correctly.