Sirona DAC UNIVERSAL - Page 173

60 53 362 D3472
D3472.201.10.20.02 07.2016
173
Sirona Dental A/S 8Operation DAC UNIVERSAL STANDARD
Operating Instructions DAC UNIVERSAL 8.3Reprocessing with DAC UNIVERSAL STANDARD
båÖäáëÜ
General attachment
Place the instruments on their respective adapters of the STANDARD lid.
Depending on the instrument and the kind of adapter, you must press or
click the instrument onto the adapter, activate a snap lock on the adapter,
or tighten a threaded ring on the instrument.
Please make sure that you hear a slight "click" when you place the
instrument on the adapter.
Pull lightly on the instrument to ensure that it is firmly attached to the
adapter.
General placement
Rotate the head of the instrument to the center post so the instrument
heads do not point at each other, as shown on the picture.
Placement is described in the separate sections if it deviates from the
general placement described here.
See "Adapters for the STANDARD lid [ → 219]" for detailed instructions on
the individual adapters.