Sirona DAC UNIVERSAL - Testing with a Protein Residue Test; Adding;Replacing the Lubrication Concentrate

60 53 362 D3472
66 D3472.201.10.20.02 07.2016
5Operation DAC UNIVERSAL ADVANCED Sirona Dental A/S
5.1Regular activities Operating Instructions DAC UNIVERSAL
5.1.2.3
Testing with a protein residue test
The protein test, e.g. „MediSafe MediCheck
TM
. MediSafe MediCheck
TM
is a quick protein test for all surfaces after the cleaning process. It is a
quick test for detecting proteins on surfaces. It is not intended to be used
as a microbiological monitoring tool. The protein test changes color from
green to purple if protein residue is found on the swab. The more proteins
are found on the swab, the darker the fluid becomes. If the color becomes
purple in fewer than 15 minutes, the test need not be continued, as
contamination is very high. The test is time and temperature sensitive; it
is therefore important to conduct the test at room temperature (20-25°C /
68-77°F). The change in color is assessed after 15 minutes at room
temperature (alternatively 15 min. at 55°C / 131°F or 30 min. at 37°C /
98.6°F).
MediSafe "MediCheck
TM
" is available at:
"http://www.medisafegmbh.com/katalog/en/MediCheck-Protein-residue-
test.html"
5.1.3 Adding/replacing the lubrication concentrate
The NitramOil #2 bottle is not yet mounted when the unit is delivered. The
bottle must be mounted and oil pumped through the hoses before the first
use of the DAC UNIVERSAL.
(Safety) information for the lubrication concentrate
CAUTION
Risk of explosion
Do not hold the NitramOil #2 bottles near an open flame.
NOTICE
Use only NitramOil #2 for the DAC UNIVERSAL.
IMPORTANT
In case of fire: There is maximum 200 ml / 0.043 imperial gallons of oil
in the DAC UNIVERSAL. There is no danger that dangerous or harmful
gases can develop in case of fire.