Sirona DAC UNIVERSAL - Page 67

60 53 362 D3472
D3472.201.10.20.02 07.2016
67
Sirona Dental A/S 5Operation DAC UNIVERSAL ADVANCED
Operating Instructions DAC UNIVERSAL 5.1Regular activities
båÖäáëÜ
Place safety data sheet_Sirona
Inserting the oil bottle
✔ The lid of the DAC UNIVERSAL water tank is open.
1. Remove the red transport plug on the oil dispenser. Please keep this
plug (it can be placed on the bottle after it is screwed in).
2. Remove the lid from the new NitramOil #2 bottle.
3. Insert the oil bottle thread down into the thread of the oil dispenser
(next to the water tank).
4. Turn the oil bottle carefully clockwise until you meet resistance.
5. Close the lid of the water tank.
 The oil bottle is now inserted in the DAC UNIVERSAL.
NOTICE
The oil must be stored and handled at temperatures below 50°C / 122°F.
Follow all warnings on the handling, use, and disposal of the oil. This
information is in the safety data sheet. The safety data sheet for
NitramOil #2 is available at www.sirona.com.
IMPORTANT
No toxic, harmful, or dangerous gases arise during the handling, use, or
removal of NitramOil #2. The oil is pumped directly from the bottle into
the DAC UNIVERSAL.