Sirona DAC UNIVERSAL - 17 EMS Ultrasonic Scaler Without Light Adapter

60 53 362 D3472
236 D3472.201.10.20.02 07.2016
11Accessories Sirona Dental A/S
11.1Adapters for the STANDARD lid Operating Instructions DAC UNIVERSAL
11.1.1.17
EMS Ultrasonic Scaler without light adapter
Dealing wi th adapters_Sirona_ Nitram
Follow the general safety information in "General placement of
instruments DAC UNIVERSAL ADVANCED [ → 99]" or "General
placement of instruments DAC UNIVERSAL STANDARD [ → 172]" when
handling the adapters described here.
Attachment
1. Remove the cap and the O-ring of the ultrasonic scaler by twisting the
cap counterclockwise.
2. Attach the EMS ultrasonic scaler without light to the adapter. When
attaching. make sure the tube diameters match.
3. Press the button on the adapter and simultaneously press the
ultrasonic scaler down onto the adapter until you meet resistance.
Removal
1. Press the button on the adapter and simultaneously detach the EMS
ultrasonic scaler without light.
2. Release the button.
Link software version_Sirona_Nitram
IMPORTANT
The cap and the O-ring must be cleaned according to the
manufacturer's instructions.
IMPORTANT
The EMS adapter may be used with a DAC UNIVERSAL in connection
with software version 3.4.31 or higher. The software version of your
DAC UNIVERSAL can be found in the menu under "About", see "Info
[ → 93]" or "Menu overview DAC UNIVERSAL STANDARD [ → 166]".