Sirona DAC UNIVERSAL - Adapter Scaler L; Adapter Scaler TL

60 53 362 D3472
D3472.201.10.20.02 07.2016
239
Sirona Dental A/S 11Accessories
Operating Instructions DAC UNIVERSAL 11.2Adapters for the FLEX lid
båÖäáëÜ
Attachment of the adapter
✔ The scaler tip was unscrewed from the ultrasonic handpiece with the
torque wrench and the tip remains in the torque wrench.
1. Screw the torque wrench onto the adapter, as it is done on the
ultrasonic handpiece, make sure it is screwed on tight.
2. Pull lightly on the torque wrench to ensure that it is correctly attached
to the adapter.
Removal
➢ Screw the torque wrench off the adapter.
11.2.1.2
Adapter Scaler TL
Dealing with adapters_Sirona_Nitram
Follow the general safety information in "General placement of
instruments DAC UNIVERSAL ADVANCED [ → 115]" or "General
placement of instruments DAC UNIVERSAL STANDARD [ → 187]" when
handling the adapters described here.
Attachment
1. Press the PerioSonic/SIROSonic TL handpiece onto the adapter,
while the lever on the side of the adapter is operated, until you hear
and feel a slight click.
2. Pull lightly on the PerioSonic/SIROSonic TL handpiece to ensure that
it is correctly attached to the adapter.
Removal
➢ Hold the FLEX lid of the DAC UNIVERSAL firmly with one hand and
simultaneously detach the PerioSonic/SIROSonic TL handpiece.
11.2.1.3
Adapter Scaler L
Dealing with adapters_Sirona_Nitram
Follow the general safety information in "General placement of
instruments DAC UNIVERSAL ADVANCED [ → 115]" or "General
placement of instruments DAC UNIVERSAL STANDARD [ → 187]" when
handling the adapters described here.
IMPORTANT
The torque wrench has to be placed straight onto the adapter so they
can´t jam up.
IMPORTANT
The torque wrench must be firmly attached to the adapter, as normally
the instrument.