64 09 713 D3610
D3610.201.01.08.02 09.2016
7
Sirona Dental Systems GmbH 1General information
Operating Instructions and Installation XIOS XG USB module and sensors 1.3General information about this operating manual
båÖäáëÜ
1.3
General information about this operating manual
Observe the Operating Instructions
Observe the Operating Instructions Please familiarize yourself with the unit by reading through these
Operating Instructions before putting it into operation. It is essential that
you comply with the specified warning and safety information.
Keep documents safe Always keep the Operating Instructions handy in case you or another
user require(s) information at a later point in time. Save the Operating
Instructions on the PC or print them out.
If you sell the unit, make sure that the Operating Instructions are included
with it either as a hard copy or on an electronic storage device so that the
new owner can familiarize himself with its functions and the specified
warning and safety information.
Online portal for technical documents We have set up an online portal for the Technical Documents at http://
www.sirona.com/manuals. From here, you can download these
Operating Instructions along with other documents. Please complete the
online form if you would like a hard copy of a particular document. We will
then be happy to send you a printed copy free of charge.
Help If you continue to have difficulties despite having thoroughly studied the
Operating Instructions, please contact your dental depot.
1.4
Other valid documents
The X-ray system includes other components, such as PC software,
which are detailed in other documents. Instructions and warning and
safety information provided in the following documents must be taken into
account:
● SIDEXIS 4 Installation Instructions
● SIDEXIS 4 User Manual
● SIDEXIS XG Installation Instructions
● SIDEXIS XG Operator's Manual
● SIDEXIS Plug-in for XIOS XG Operator's Manual
Keep these documents handy at all times (file them in the X-ray System
Logbook in the FR of Germany).
The system integrator must complete the enclosed declaration of
conformity.
To safeguard your warranty claims, please complete the attached
"Installation Report / Warranty Passport" together with the service
engineer immediately after the installation of your unit.
1.5
Intended use
The XIOS XG X-ray system is designed for digital acquisition of intraoral
X-ray images for diagnostic purposes. The system is used on patients by
dental professionals. The digital images produced are transferred to a PC
and displayed on a monitor. The images can be edited, saved and printed
on the PC.
The product must not be operated in hazardous areas.
To Next Page
Loading...
Need help?
General
