Siruba DL3880 Series - Machine Specifications; Machine Installation

3500
TV×7 14# 21# UY128GAS 14# 20#
1.4 4mm
30mm
1/8 "(3. 2 m m ) 3/ 16"( 4.8 mm ) 1/ 4"( 6 . 4m m)
1/8" 1/2"
8 10mm
10
Specification
Stitch type Two-needle double-row chain stitch
Speed Max. 3,500 s.p.m.
Needle TV×7 14# 21# or UY128GAS 14# 20#
Stitch length 1.4 4mm
Stroke of needle bar 30mm
Gaugas of clouble-row 1/8 "(3 . 2mm ) 3 / 16 " (4. 8mm ) 1/4"( 6.4m m )
chain stitch
Thread take-up type Needle bar thread take u type
Looper Separately adjustable type, for the range of 1/8"to 1/2"
Needle guard Oscillating type and rigid type
Light clearance of knee lifter 8 10mm
Oil supply Impeller-type pump
Lubricating oil
#
10 while oil
1.
, ,
( 1).
2.
, , .
4 Installation of the machine(Fig.1)
1.
To instal the oil reservoir
Put the oil reservoir rubber cushion and oil reservoir felt cushion on four corners of the
opening of the table, fix them with the wood screws ,then instal the oil reservoir (Fig.1)
2.
Put the machine connecting hooks into the holes to engage respectively two hinges seated
in the table, then place the machine on the four cushions.
1.
(10 ) HIGH ( 2).
2.
Low , .
. 4 .