Siruba DL918 User Manual

G 2
Guide of specification
The Specification and Function of The Motor and The Electronic Controller
Item Illustration
Power
Voltage
AC 1Φ220V ±15% , 50Hz / 60Hz
Three-phase
Sinusoidal Drive
Motor
1.Rated Output : 500W
2.Rated Current : 3A
3.Max. Current : 13A
4.Rated Speed : 5000rpm
5.Max. Speed : 5500rpm
6.Rated Torque : 0.95Nm
7.Max. Torque : 3.5Nm
8.Encoder 解析度 Pixel: 360pulse / 回轉 Rotation
9. Insulation Class : B class( 130℃ / 266℉ )
10. Dust Level: IP40
馬達驅動型態’
Types of Drive
Motor
1.
三相弦波驅動
Three-Phase Sinusoidal Drive : AC Servo Motor 500W ( BLDC )
2.停針位置誤差 ± 3 度 Needle Position Error of ± 3 degrees
3.速度指令值 Velocity Command Value : 200 ~ 5000rpm
4.切線速度值 Tangential Velocity Value : 200 ~ 300rpm
5.加速速率值 Accelerate The Rate of Value : 4500rpm/150ms
6.減速速率值 Deceleration Rate Value
: 4500rpm/150ms
7.動力煞車 Dynamic Brake
: 1 ~ 5 scale
8.動力煞車時間值 Time Value of Power Brakes : 50 ~ 990ms
9.速度變動率 : 切線、低速:±10spm , start/end : ±20spm ,最高速 : ±50spm
Speed Rate of Change: Trimmer, Low Speed: :±10spm , start/end : ±20spm ,
Highest Speed: ±50spm ,
輸出輸入裝置規格與功能
The Specification and Function of Input and Output Device
項目
Item
內
容
說
明
Illustration
速度回饋
Speed
Feedback
Encoder ( 信號源 Source A & B & Z ) & Hall Sensor

Siruba DL918 Specifications

General

Brand	Siruba
Model	DL918
Category	Sewing Machine
Language	English