Siruba DL918 User Manual

G 30
故障排除
Troubleshooting
錯誤碼
Error
Code
異常現象說明
Cause of the Problem
解決措施
Measurement and Solution
Err 1
過電流保護
Over Current Protection
1.
關閉電源。
Turn off the power.
2. 確認 IGBT 模組工作正常。
Check if the IGBT module is normal.
3. 一分鐘後重新送電。控制器若仍有錯誤碼顯示，請更換
控制器並通知廠商。
Reboot the control box after 1 min. If the error code still
happens, please exchange control box and contact with
qualified technician.

Siruba DL918 Specifications

General

Brand	Siruba
Model	DL918
Category	Sewing Machine
Language	English