Need help?Do you have a question about the Siruba DL918 and is the answer not in the manual?
General| Lubrication | Automatic |
|---|---|
| Type | Overlock |
| Max Stitch Length | 4 mm |
| Motor | Servo Motor |
| Needle Quantity | 2 |
| Differential Feed Ratio | 0.7 - 2.0 |
Details the specifications and functions of the motor and electronic controller.
Covers specifications for input/output devices, connectors, and valve connections.
Illustrates the functional block diagram of the electric controller.
Introduces the control panel and explains the functions of its buttons.
Details function key operations, parameter saving, and LED control on the control panel.
Details parameters for motor speed, stitch modes, tacking, and stitching settings.
Covers parameters for bar tacking, constant stitching, machine code, and cycling tests.
Explains parameters for solenoids, safety switches, needle positioning, and multi-function keys.
Explains how to navigate the manual and set parameters using the control panel buttons.
Provides detailed steps for constant stitching, special function settings, and display table.
Details causes and solutions for Over Current, Voltage, and Torque errors.
Covers errors related to communication, overheating, Hall Sensor, and Safety Switch.
Provides a description and troubleshooting steps for Safety Switch errors.
Lists common repair issues like low rotation speed, LED not lit, and electromagnet not working.
Illustrates temperature detection and auxiliary power supply circuit diagrams.
Explains how to adjust the speed controller and arrange wire harnesses.
Provides step-by-step instructions for assembling the machine cover.
Shows exploded views and part numbers for DL918 machine components.
Contains frequently asked questions and their answers.
To Next Page
