Siruba DL918 User Manual

G 31
錯誤碼
Error
Code
異常現象說明
Cause of the
Problem
解決措施
Measurement and Solution
Err 4
過電壓保護
Over Voltage
Protection
1. 關閉電源。
Turn off the power.
2.
請檢查是否插錯供應電源或電壓過高。
Check if the control box is applied to wrong power source or if
the voltage for power line is too high.
3.
如電壓過高，則待電壓回復正常後重新開機。如無，則一
分鐘後重新送電。
If the voltage for power line is too high, please wait for reboot
before power line comes back to normal. If not, reboot the
control box after 1 min.
4.
控制器若仍有錯誤碼顯示，請更換控制器並通知廠商。
If the error code still happens, please exchange control box and
contact with qualified technician.
錯誤碼
Error
Code
異常現象說明
Cause of the Problem
解決措施
Measurement and Solution
Err 7
堵轉檢知遮斷
Over Torque
1. 關閉電源。
Turn off the power.
2.
檢查馬達動力線插頭配線
(CN102)
是否接觸不良。
Check the connection for motor power cable (CN102).

Siruba DL918 Specifications

General

Brand	Siruba
Model	DL918
Category	Sewing Machine
Language	English