Sirus Drop 4 - Mounting

4.1 Mounting
1. Connect the cables of the amplier to the screw terminals of the speaker.
2. Screw the cover of the screw terminals to the speaker.
3. Thread the cable through the device cover.
4. Attach the device cover to the speaker.
1. Check the condition of the surface and screw the bracket to the wall with the supplied
screws.
2. Screw the speaker to the stud of the bracket.
Preparations
ö
#
$
%
Wall mounting
ö
#
Installation
Drop 4, drop 6, drop 8
11
Passive Speaker