Sirus Drop 4 - Page 13

18.5 cm
ö
# #
$
%
&
1. Screw the bracket to the ground spike with the supplied screws.
2. If required, screw the base plate to the ground spike. Then screw the base plate to suit‐
able oor material (e.g. wood).
3. Screw the speaker to the stud of the bracket.
4. Route the cable of the amplier through the device cover and attach the device cover to
the speaker.
5. Insert the ground spike completely in the ground.
Earth mounting
Installation
Drop 4, drop 6, drop 8
13
Passive Speaker