Sitecom Multi Functional USB server LN-308/309, WL-203
8.6 Maintenance
To restart the Server, restore the Server to factory defaults, download new firmware file from
product’s public website and upgrade new firmware.
• Time Setup: click this button, to configure the time-zone, and time-settings for the Server.
• Restart Server: click this button, the Server will restart
• Factory Default: click this button, the Server will restore factory default values.
• Download New Firmware: click this button to download new firmware or user software
from our website http://www.sitecom.com.
• Upgrade Firmware : click Open and find the firmware file to be upgraded. Click Upload to
start the firmware upgrade into the MFP Server.
To Next Page
Loading...