39
A
GE
39
Advanced Wireless
This page allows you to configure the fragmentation threshold, RTS threshold,
beacon period, transmit power, DTIM interval, wireless isolation, WMM and WDS
(wireless distribution system).
Transmit Power: You may control the output power of the device by
selecting a value from the drop-down list. This feature can be helpful in
restricting the coverage area of the wireless network.
Beacon Period: Beacons are packets sent by a wireless Access Point to
synchronize wireless devices. Specify a Beacon Period value between 20 and
1000. The default value is set to 100 milliseconds.
RTS Threshold: Packets over the specified size will use the RTS/CTS
mechanism to maintain performance in noisy networks and preventing hidden
nodes from degrading the performance. Specify a value between 1 and
65535. The default value is 2346.
Fragment Threshold: Packets over the specified size will be fragmented in
order to improve performance on noisy networks. Specify a value between
256 and 65535. The default value is 2346.
To Next Page
Loading...
