Basic Settings
Mode Allows you to set the AP to AP or WDS mode.
802.11 Mode Allows you to set the AP fixed at 802.11b or 802.11g mode. You
can also select B+G mode to allow 802.11b and 802.11g clients at the same
time.
Band Allows you to choose the channel bandwidth 20 MHz or 20/40 MHz.
ESSID This is the name of the wireless signal which is broadcasted. All the
devices in the same wireless LAN should have the same ESSID.
Channel The channel used by the wireless LAN. All devices in the same
wireless LAN should use the same channel.
Extension Channel Allows you to select the extension channel when Channel
bandwidth is set to 20/40 MHz.
25
To Next Page
Loading...
