Need help?Do you have a question about the SJCAM A10 and is the answer not in the manual?
General| Battery Capacity | 2650mAh |
|---|---|
| Photo Resolution | 12MP |
| Waterproof | No |
| Field of View | 140 degrees |
| Connectivity | Wi-Fi, USB |
| Screen | 2.0 inch LCD |
| Storage | MicroSD up to 64GB |
| Video Resolution | 1080p at 30fps |
Long press power button for 2 seconds to boot, or long press to power off.
Swipe up or click icon to call mode menu, slide to browse and select shooting mode.
Auto mode adjusts light based on conditions. Manual setting toggles light on/off.
Single press power button in standby or recording to turn laser light on/off.
Press shooting button to start/stop recording. Red dots indicate recording.
Press shooting button to take a photo. A click sound confirms capture.
Press shooting button to capture multiple photos rapidly.
Press shooting button to start/stop voice recording. Red microphone icon indicates active recording.
Access playback via menu settings to view photos, videos, or voice recordings.
Press shooting button to start/stop Video Lapse recording. Red dots flash during progress.
Navigate and select parameter options to modify settings. Use Return key to exit.
Options for resolution, affecting quality, file size, and recording time.
Options for photo resolution, impacting quality and file size.
Selectable durations for voice recordings (e.g., 3, 5, 10 minutes).
Choose between 3 or 5 photos for rapid sequence capture.
Select time intervals (e.g., 1 sec to 1 min) for creating time-lapse videos.
Continuously records in segments, overwriting oldest when memory is full.
Automatically starts/stops recording when motion is detected or ceases.
Option to turn the shooting time watermark on or off.
Feature to enhance detail in scenes with extreme light and dark areas.
Automatically takes photos at set intervals in photo mode.
Selectable options for image quality: Fine, Standard, or Economy.
Adjusts sensor sensitivity to light for optimal image capture.
Allows selection of the device's operating language.
Set device date and time, with auto-update via Wi-Fi and app.
Clears all storage files. Recommended to export data first.
Automatically starts recording when entering Record mode or powering on.
Device powers off automatically after a set period of inactivity.
Controls the sound volume for camera button outputs.
Device enters sleep mode and turns off screen after inactivity.
Select between 50Hz or 60Hz based on regional requirements.
Option to turn the logo watermark on or off.
Allows modification of the device's unique identification number.
Change the Wi-Fi network name (SSID) and password.
Restores all device settings to their original factory defaults.
Displays the current installed firmware version of the device.
Use a micro SD card meeting specified requirements for capture.
Handle with care, avoid dust/moisture. Power off before insertion/removal.
Open battery cover, insert card label-side inwards, close cover.
Recommended for performance. Erases all stored files.
Navigate to Settings > Format and confirm.
Guaranteed for 2 years. Requires proof of purchase for service.
Covers misuse, natural disasters, unauthorized modifications, wear, and external damage.
States compliance with essential requirements of EU directives.
Proper disposal of electronic waste to prevent environmental harm.
To Next Page
