11. System configuration
Pump settings => Filling/Low Level => Monitoring => Low Level Detection
Step Key Display Description
Fill Level Control Specify the type of fill level control
5.1
In menu selection Low Level Detection:
)You will enter the LL Lube Limited By menu
• Press <Select control key>
)The following settings are available:
o Empty pump time
o Empty lubricating cycles
o disabled
• Use <down/up arrow key> to select the type of lubrication limit
• Press <Save control key>
• Press <Back control key>
Monitoring
Filling monitoring type
[Low Level Detection ]
LL Lube Limited By
[disabled ]
SelectBack
EN
114
To Next Page
Loading...
