2
SKF TKRT 20
Table of contents
EC Declaration of conformity ................................................................. 3
Safety recommendations ....................................................................... 4
1. Technical data ................................................................................ 5
2. Features and operation ................................................................... 6
3. Default setting - rpm mode, non autoranging ................................. 8
3.1 Programming - measurement mode selection ...................................8
3.2 Optical revolutions speed measurement - rpm or rps .......................8
3.3 Contact revolution speed measurement - rpm or rps .......................9
3.4 Linear contact speeds measurement - metres, yds, feet etc. ...........9
3.5 Autorange selection - speed modes only .............................................9
3.6 Average speed monitoring mode - av. .................................................9
3.7 Operation of Maximum & Minimum modes
Speed Capture functions - mx, mn. .................................................. 10
3.8 Count measurement mode - cnt ........................................................ 10
3.9 Total Linear Length measurements - mt, ft, yd ............................. 10
3.10 Time interval measurement - int ....................................................... 11
3.11 Display orientation - Inverting function - All modes ....................... 11
3.12 Remote Input ......................................................................................... 11
3.13 Battery replacement ............................................................................. 11
4. Maintenance ................................................................................. 12
5. Spare parts and accessories .......................................................... 12
Original instructions
To Next Page
Loading...
