SKF TKSA 80 User Manual

How to Use the SKF TKSA 60 and
TKSA 80 Alignment Tools
P/N
32233700
-EN
Revision F
Warning! - Read this manual before using this product. Failure to
follow the instructions and safety precautions in this manual can result in
serious injury. Keep this manual in a safe location for future reference.
User Manual
Copyright  2014 by SKF
All rights reserved.
2 Michaelson Square, Kirkton Campus, Livingston, UK EH54 7DP
Tel: +44 (0) 1506 470011 Fax: +44 (0) 1506 470012
Customer Service: +1 858-496-3627 or 1-800-523-7514

SKF TKSA 80 Specifications

General

Brand	SKF
Model	TKSA 80
Category	Measuring Instruments
Language	English

Summary

Introduction to SKF Alignment Tools

Safety and Handling Precautions

Covers general, personnel, device safety, and environmental handling.

The Display Unit

Display Unit Features and Controls

Details the display unit stand, buttons, and keypad for navigation and interaction.

Touch-Screen and Power Management

The Measuring Units

Attaching Measuring Units to Shafts

Provides detailed instructions for mounting the measuring units using brackets and chains.

Measuring Unit Power and Status Indicators

Preparing for an Alignment Job

Display Unit and Measuring Unit Setup

Guides on configuring display unit settings and pairing measuring units.

System Settings and Unit Pairing

Date/Time Settings and Unit Pairing Process

Detailed Pairing Procedure

Step-by-step guide on initiating and completing the wireless pairing process.

Performing a Quick Alignment

Quick Alignment Setup and Configuration

Guides on setting up a Quick Alignment job, including dimensions, tolerances, and display options.

Measurement and Inspection Procedures

Details how to record measurements and perform additional inspections like runout and soft foot.

Alignment Results and Corrections

Guides on viewing alignment results and performing horizontal/vertical corrections.

Job Completion and Reporting

Details saving the alignment job and generating the job report.

Setting Up and Performing Full Alignment Jobs

Overview and Machine Train Setup

Introduces full alignment jobs and guides on selecting machine trains.

Inspections Setup for Full Alignment

Shims and Chocking Setup

Foundation Bolt Setup

Alignment Target Setup

Defining Alignment Tolerances

Working with the Job Database

Managing Saved Alignment Jobs

Guides on selecting and performing operations with saved alignment jobs.

Key Job Management Actions

Creating Machine Trains (TKSA 80)