SKF TKSA 60 User Manual

How to Use the SKF TKSA 60 and
TKSA 80 Alignment Tools
P/N
32233700
-EN
Revision F
Warning! - Read this manual before using this product. Failure to
follow the instructions and safety precautions in this manual can result in
serious injury. Keep this manual in a safe location for future reference.
User Manual
Copyright  2014 by SKF
All rights reserved.
2 Michaelson Square, Kirkton Campus, Livingston, UK EH54 7DP
Tel: +44 (0) 1506 470011 Fax: +44 (0) 1506 470012
Customer Service: +1 858-496-3627 or 1-800-523-7514

SKF TKSA 60 Specifications

General

Laser Class	Class 2
Protection Class	IP54
Type	Laser shaft alignment tool
Shaft Diameter	20 to 150 mm
Display	LCD
Communication	Bluetooth
Battery Life	8 hours
Operating Temperature	-10 to +50 °C
Storage Temperature	-20 to 60 °C
Sensor	Laser

Summary

Introduction

Safety Messages and Precautions

Essential safety warnings and precautions for using the equipment and for personnel.

The Display Unit

Unit Operation and Controls

Battery and Power Management

The Measuring Units

Battery and Attachment Procedures

Preparing for an Alignment Job

Display Unit and Measuring Unit Setup

Guides configuring display unit settings, pairing measuring units, and selecting units of measurement.

Measuring Unit Pairing and Settings

How to Perform a Quick Alignment

Quick Alignment Setup and Configuration

Guides setting up horizontal and vertical alignment, including dimensions, tolerances, and view options.

Recording Measurements and Performing Inspections

Explains taking as-found measurements and conducting additional inspections like runout and soft foot.

Viewing Results and Making Corrections

Details how to interpret alignment results and perform necessary corrections in both horizontal and vertical planes.

Saving and Reporting Alignment Jobs

How to Set Up and Perform Full Alignment Jobs

Full Alignment Job Setup Process

Guides through machine train setup, inspection selection, shims/chocks, and bolt configuration.

Alignment Targets and Tolerances