Need help?Do you have a question about the SKF LAGM 1000E and is the answer not in the manual?
General| Brand | SKF |
|---|---|
| Model | LAGM 1000E |
| Category | Measuring Instruments |
| Language | English |
Explains how to enter and navigate the device menu for various settings and counters.
Describes starting the meter via grease flow or the power button for portable use.
Details activating standby mode for continuous monitoring on automatic lubrication systems.
Instructions for displaying, resetting, and exiting the subtotal and total grease dispensed counters.
How to determine the correction factor by dividing the actual grease quantity by the measured quantity.
Method for updating the calibration factor by multiplying the existing factor with the correction factor.
Step-by-step guide to adjust the calibration factor using the device's buttons and display.
Procedure for selecting the preferred unit of measurement for dispensed grease (cm³, gram, oz, fl oz).
How to configure the automatic power-off delay or select standby mode for battery saving.
Instructions for adjusting the display backlight to either a low or high power setting.
To Next Page
