What to do if the screen is frozen on SKF TKST 11?
If the screen of your SKF Measuring Instruments is frozen, remove the batteries, wait for one minute, and then reinsert them. Start the device to see if the issue is resolved.
How to clean the display of SKF TKST 11?
To clean a dirty display on SKF Measuring Instruments, use a wet cotton swab to gently clean the display area. Then, use a clean, dry cotton cloth to remove any remaining water. Avoid using excessive water or solvents.
General| Display | LCD |
|---|---|
| Protection class | IP54 |
| Measurement Range | 30 to 300 000 flashes per minute (FPM) or revolutions per minute (RPM) |
| Resolution | 0.1 RPM (below 1, 000 RPM), 1 RPM (above 1, 000 RPM) |
| Flash Rate | 30 to 300 000 flashes per minute (FPM) |
| Operating Temperature | 0 to +50 °C |
| Material | Plastic |
| Power Supply | 4 × AA batteries |
| Weight | 300 g (0.66 lb) including batteries |
Covers critical warnings, warranty voidance, proper disposal, and operational notes for safe use.
Presents the EU and UK Declarations of Conformity for the TKST 11 product.
Details the stethoscope components, includes essential warnings, and lists package contents.
Illustrates the SKF TKST 11 stethoscope, its parts, and display elements.
Provides visual examples of the stethoscope in use, showing listening and muted states.
Lists detailed technical specifications including frequency range, temperature, battery, and weight.
Step-by-step guide for inserting batteries and setting up the stethoscope and headset.
Explains how to operate the stethoscope, adjust volume, mute, and turn it off.
Provides solutions for common problems like a dirty display or short operating time.
Lists available spare parts and accessories for the SKF TKST 11 stethoscope.
To Next Page
