8 EN
5. Troubleshooting
Problem Solution
Display is dirty Use a wet cotton swab to clean the display area and a clean, dry cotton cloth to remove
any water remains.
Do not wash the display with too much water or solvents.
Screen is frozen Remove the batteries and wait for 1 minute before placing them back.
Start the device and check that everything works.
Too short
operating time
Replace batteries with new batteries.
Check if another brand offers better performance.
Do not store the stroboscope in very hot or cold environments.
6. Spare parts and accessories
Designation TKST 11
TKST-PROBES 2 probes set
TKST-HEADS Headset
TKST 11-CB Toolcase with inlay for TKST 11
TDTC 1/B General toolcase without inlay, size B
To Next Page
Loading...
