3SKF TMBH 1
English
Safety recommendations
• Always read and follow the operating instructions.
• The unit is surrounded with a low energy magnetic field which might cause
interference with sensitive electronic equipment such as pace-makers,
electronic thermometers and wrist watches.
• Make sure the supply voltage does not deviate from the acceptable range of
100 - 240 V, 50 - 60 Hz.
• The equipment should not be used in areas where there is a risk for explosion.
• Do not expose the equipment to high humidity or direct contact with water.
• Never heat to temperatures above 200 °C (392 °F).
• Never disconnect the heating clamp during operation.
• Never modify the heater.
• All repair work should be taken care of by an SKF repair shop.
EC Declaration of conformity
We, SKF Maintenance Products, Kelvinbaan 16,
3439 MT Nieuwegein, herewith declare that the following product:
SKF High Frequency Portable Induction Heater
TMBH 1
has been designed and manufactured in accordance with:
EUROPEAN LOW VOLTAGE DIRECTIVE 2014/35/EU, EMC DIRECTIVE 2014/30/EU,
EUROPEAN ROHS DIRECTIVE 2011/65/EU
Nieuwegein, The Netherlands, May 2016
Sébastien David
Manager Product Development and Quality
To Next Page
Loading...
Need help?
General
