WARNING!
Please make sure
that the unit is unplugged
from an electrical outlet
1. Attach the mop
head to the main body as
follows: insert the swivel
joint
into
deiignated hole in the
main body, and then use the screw
to fix well. Make sure that
the
mop head
is
securely
locked in
place
before usage.
(Fig.
l)
2. lnsert the extension
handle into the designated opening
in the main body until
it
gets
locked in
place
by the extension
handle lock button.
(Fig.2)
3.
lnsert
the
power
supply cord
into the
cord
holder located at the top of
the extension
handle as
illustrated in Fig. 3 and then insert to
power
supply cord into
the upper cord
wrap
as
illustrated in Fig. 4.
4. Place
the microfiber cloth on the bottom of the
mop head and make sure all
the loops
on the
cloth
are aligned
with the
gripping
hooks on the bottom of
the mop head
(Refer
to
Fig.
5),
then
press
the cloth against the
mop head so the loops on the cloth
catch the
gripping
strips on
the mop head and hold the
pieces
together.
5. When dean carpet, cover
cloth on mop head, then
put
on slip
ring.
NOTICE:
Never use the carpet
glider
on surfaces
that are
prone
to scratching.
Caution:
Never assemble or
remove the accessories while the unit
is in operation.
Fig.1
The
unit is
designed
to thoroughly
clean lloor
surfaces, such
as marble,
ceramic,
carpet,
stone, linoleum,
sealed hardwood
floor
and
parquet.
Not
all floors
types
are suitable
for
steam
cleaning.
on surfaces
that
have
been treated
with
wax, the
wax may
be removed
by the
heat and
steam
action.
Do not
use
on unsealed
flooring
or let
unit stand
on any wood
or heat
sensitive
floor for
an extended
period
of
time. This
could cause
the wood
grain
to rise.
when
using
on vinyl, linoleum
or any
other heat
sensitive floors,
use
extra
caution. Too
much heat
can melt
down
glue
in
the flooring.
when
using the
appliance
on laminated
floor,
the laminated
floor
should
have
been laid
professionally
and not
have
any
gaps
or
cracks in
which humidity
could enter.
Test
the unit
on a
small isolated
area
of
your
flooring
prior
to over-
all use on
any floor
surface.
Always
check the
use and
care instructions
of
your
flooring
manufacturer
before
using
the
unit.
lf
any
doubt,
please
consult
a specialist.
Only
use the
carpet
glider
on carpeting
& rugs.
use
of the
carpet
glider
on other
floor surfaces
will
cause
streaking
and can
posslbly
scratch
the surface.
Fill
the water
tank with
water.
Make
sure that
the unit is
unplugged.
Tum
the water
tank
cap counter+lockwlaa
b ha
opan
,
oft,
poaHon
and ilno\o
0tt
cap as illustrated
in
Flg,
1a, 1b&10,
1d,
05leN
To Next Page
Loading...