Fig. 10a
I
Fig. 10b
Round Brush
10.
Attach the round brush by screwing
it
onto the straight nozzle that connected to the
extension hose, as illuskated in Fig. 10a &10b.
Bend Nozzle
11 . Attach the bend nozle
by screwing
it
onto the straight
nozzle
that connected to the
extension
hose.
as
illustrated
in Fia. 11a &11 b.
6.
Wipe
all surfaces of the
unit with a soft cloth. Store in a
protected
dry area.
7. Please
store the unit in
a cool and dry
place
when not in
use.
Do
not leave it
exposed
to sunlight or rain.
8.
Upright storage of the unit with
a wet mop
pad
may result in the formation
of white
marks
on
your
floor. To remove the
white marks, clean area with vinegar.
Make sure to
remove
the mop
pad
before storage.
BE
SURE THAT THE UNIT IS DISCONNECTED
FROM THE POWER
OUTLET
WHEN PERFORMING
CLEANING.
Drain
the remaining water in the tank
and clean it after every
use. Please use
detergent
to clean the accessories
(Jet
Nozzle
and Round Brush) when
they are dirty,
then wash
them with
clean
water
and dry them in air.
How to decalcifu the water tiank interior:
To
clean calcium deposits that
build up inside the water tank,
add one
or two
tablespoons of white vinegar
to a full water tank, close the water
tiank cap
and shake the
contents. DO NOT
TURN THE STEAMER
ON.
Let it
sit for a few hours. Then,
empty the
water
tiank and refill with clean water and
empty until it rinses clear.
WARNING!
DO NOT IMMERSE UNITIN WATER.
Jq'M
Fia. 11a I Fia. 11b
Note:
1. After assembly each
accessories, add
water ln
the tank up to the
MAX level
by using
the measuring
cup.
2. Tum
the knob of the water tank in
'
LOCK' diagram
position,
then
you
can open the
power
srvitch
(Min
to Max), choose steam flow from
'
MIN
'
to
'
MAX'.
1 . Unplug
power
cord from outlet
2. Allow mop
pad
to
cool down and carefully remove cleaning cloth from mop
head,
as
cleaning cloth could still be hot.
3. Any water remaining in
the water tank should be emptied
prior
to appliance storage.
Always
empty the water tiank at the end of each use.
4, Let any water
(remained
as a
product
of condensation) drain from the steam opening
priorto
storing the
appliance.
5. Wrap
power
cord arcund upper and lower cord wrap.
1
'1
rr.r
rt
12
eru
1--.1
Model
KB-2012
RrttFomr
r{qry-
t0t0Hz
Rating Voltage
22G24CtV|/c
RrtmFrqtnnoy
To Next Page
Loading...