22
Whenever parking brake is applied and engine is running, injection oil
level pilot lamp lights up to remind you that it is engaged.
Mechanical Brake
To engage mechanism, squeeze brake lever and maintain while pull-
ing button with the other hand. There are 2 retaining notches on but-
ton lever; pull button until it locks on a notch then release brake lever.
To release mechanism, squeeze brake lever then fully push parking
brake button. Always release parking brake before riding.
TYPICAL
Step : Squeeze and hold
Step : Fully pull
Hydraulic Brake
To engage mechanism, squeeze brake lever and maintain while pull-
ing locking lever with a finger. Brake lever is now compressed half-
way applying brakes.
To release mechanism, squeeze brake lever. Locking lever will auto-
matically return to its original position. Brake lever now returns to
rest position. Always release parking brake before riding.
-
CAUTION
Make sure parking brake is fully disengaged before operating
the snowmobile.
A25H30A
1
2
1
2
To Next Page