54
SUSPENSION ADJUSTMENTS
All Models Except Tundra II LT and Skandic WT/SWT
For factory recommended adjustments refer to decal on pulley
guard.
This decal describes settings for optimum comfort according to load
for your Ski-Doo model.
General
All Models
Snowmobile handling and comfort depend upon suspension adjust-
ments.
Choice of suspension adjustments vary with carrying load, driver’s
weight, personal preference, riding speed and field condition.
NOTE : Some adjustments may not apply to your snowmobile.
Use special keys in tool kit.
TYPICAL
1. Rear springs for comfort
2. Center spring for steering behavior
3. Stopper strap for snowmobile weight transfer
4. Acceleration and control modulator (ACM) – Handling
5. Front spring for handling
6. Ski stopper for stability
A03H1FB
1 2
3
4
6
5
To Next Page
Loading...