25
Skandic SWT
A 4-position lever:
Shifting Procedure
With snowmobile completely stopped and engine at idle, move lever
to engage in desired gear.
Do not force lever. If unable to shift, apply throttle to move snowmo-
bile and try again.
When shifting from 1
st
gear to 2
nd
gear vehicle may be in motion (20
km/h (12 MPH) but engine must be at idle. Maximum speed in first
gear: 60 km/h (37 MPH).
-
CAUTION
Bring snowmobile to a complete stop before changing gear.
◆
WARNING
These snowmobiles are capable of a fast reverse. Always ap-
ply the brake before shifting and come to a complete stop
then change gear. Ensure the path behind is clear of obsta-
cles or bystanders. Fast reverse while turning, could result in
loss of stability.
A29D0BA
To Next Page