To Next PageTo Next Page
Need help?Do you have a question about the Ski-Doo Expedition Series and is the answer not in the manual?
General| Brand | Ski-Doo |
|---|---|
| Model | Expedition Series |
| Category | Offroad Vehicle |
| Language | English |
Essential safety information before operating the vehicle.
Explanation of safety message types and their meanings.
General safety guidelines for operating the snowmobile.
Specific safety warnings and recommendations for operation.
Guidance on proper riding techniques and positions.
Critical pre-operation check of vehicle controls and components.
Guidelines for safely carrying passengers on the snowmobile.
How different terrains affect riding and vehicle handling.
Dangers and precautions when riding on ice.
Awareness and safety measures for avalanche risks.
Techniques for turning the snowmobile.
Riding responsibly and protecting the environment.
Critical safety rules related to track and studs.
Guidelines for installing studs on approved tracks.
Details on safety labels affixed to the vehicle.
Importance of understanding vehicle safety labels.
Controls steering and rider input for directional changes.
Controls engine speed via thumb activation.
Controls vehicle braking by squeezing the lever.
Emergency switch to shut off the engine immediately.
Displays speed, RPM, and other vehicle information.
Indicator lights and messages for vehicle status and anomalies.
Information about the 1+1 passenger seat.
Safety guard for the drive belt, with removal and installation instructions.
Switch to select engine operating modes (Eco, Standard, Sport).
Guidelines on recommended fuel types and octane ratings.
Safe procedures for refueling the snowmobile.
Specifications for engine oil and injection oil.
How to check and add engine injection oil.
Recommended procedures for breaking in the new vehicle.
Step-by-step guide for starting the engine.
Procedures for starting the engine in emergency situations.
How to use the starter rope if the electric starter fails.
Procedures for checking, adding, and replacing engine coolant.
Procedures for checking and adding injection oil for E-TEC engines.
Procedures for checking engine oil level for 4-TEC/ACE engines.
Steps for replacing engine oil and filter on 900 ACE models.
Recommended brake fluid and checking the fluid level.
Recommended gearbox oil and checking the oil level.
Inspection, spare belt storage, and replacement of the drive belt.
Information on drive pulley adjustment for E-TEC models.
Inspecting track condition and alignment.
Visual inspection of the track for wear and damage.
Procedures for verifying and adjusting track tension and alignment.
Built-in function for E-TEC engine storage lubrication.
Troubleshooting steps when the electric starter fails.
Diagnosing issues when engine RPM is too low for clutch engagement.
Causes and solutions for engine overheating.
Troubleshooting steps for lack of acceleration or power.
Potential causes and solutions for engine backfiring.
Diagnosing and resolving engine misfires.
Troubleshooting when throttle inputs are not recognized.
Understanding indicator lamps, messages, and beeper codes for vehicle status.
Procedure for reading diagnostic fault codes from the display.
Requirements that must be met for warranty coverage.
Steps to follow when seeking warranty service.
Duration of the emission-related warranty coverage.
Lists all components covered under the emission-related warranty.
Requirements for international warranty coverage.
Steps for obtaining international warranty service.
