Skil 3800 User Manual

For English Version Version française Versión en español
See page 2 Voir page 10 Ver la página 18
Operating/Safety Instructions
Consignes de fonctionnement/sécurité
Instrucciones de funcionamiento y seguridad
IMPORTANT: IMPORTANT : IMPORTANTE:
Read Before Using Lire avant usage Leer antes de usar
1-877-SKIL999 (1-877-754-5999) www.skil.com
Call Toll Free for
Consumer Information
& Service Locations
Pour obtenir des informations et
les adresses de nos centres de
service après-vente,
appelez ce numéro gratuit
Llame gratis para
obtener información
para el consumidor y
ubicaciones de servicio
3800

Skil 3800 Specifications

General

Brand	Skil
Model	3800
Category	Saw
Language	English

Summary

Safety

General Safety Rules for Benchtop Tools

Safety guidelines for benchtop tools, covering work area, electrical, and personal safety.

Electrical Safety

Precautions for safe electrical use of the tool.

Personal Safety

Measures to ensure operator safety during tool use.

Safety Rules for Miter Saws

Tool Use and Care

Electrical Requirements

Laser Warnings

Assembly

Unpacking and Checking Contents

Removal and Installation of the Blade

Detailed instructions for blade removal and installation.

Adjustments

Blade Square to Table (90°)

Procedure to ensure blade is square to the table.

90° Blade Alignment

Steps for aligning the blade to the table at 90°.

Blade 45° To The Table

Instructions for setting the blade to a 45° table angle.

45° Blade Alignment

Blade Square to Fence

Laser Alignment System Adjusting

Basic Saw Operations

Body and Hand Position

Guidelines for proper body and hand placement for safe cutting.

Switch Activation

Saw Operations

Miter Cut

Procedures for making miter cuts at various angles.

Bevel Cut

Instructions for performing bevel cuts at different angles.

Compound Cuts

Guidance on performing cuts involving both miter and bevel angles.

Base Molding

Cutting Crown Molding

Techniques for accurately cutting crown molding.

Crown Molding Laying Flat on Table

Steps and chart for cutting crown molding flat on the table.

Crown Molding Angled to Table and Fence

Instructions for cutting crown molding at an angle.