Skil DP9505-00 User Manual

WARNING: To reduce the risk of injury, the user must read and understand the
Owner’s Manual before using this product. Save these instructions for future reference.
AVERTISSEMENT : Afin de réduire les risques de blessure, l’utilisateur doit lire et
comprendre le guide d’utilisation avant d’utiliser cet article. Conservez le présent guide
afin de pouvoir le consulter ultérieurement.
ADVERTENCIA : Para reducir el riesgo de lesiones, el usuario debe leer y comprender
el Manual del operador antes de utilizar este producto. Guarde estas instrucciones para
consultarlas en caso sea necesario.
Owner’s Manual
Guide d’utilisation
Manual del propietario
For Customer Service
Pour le service à la clientèle
Servicio al cliente
Drill Press
Perceuse à colonne
Taladro de columna
1-877-SKIL-999
OR
www.skil.com
Model/ Modelo/ Modèle: DP9505-00

Skil DP9505-00 Specifications

General

Brand	Skil
Model	DP9505-00
Category	Power Tool
Language	English

Summary

GENERAL POWER TOOL SAFETY WARNINGS

ADDITIONAL SAFETY RULES

Drill Press Specific Safety

Stability and Location

Ensures the drill press is stable and used in a proper location.

Avoiding Entanglement Hazards

Precautions to prevent being pulled into spinning parts.

ELECTRICAL REQUIREMENTS

Power Source Connection

Instructions for connecting the drill press to electricity safely.

SYMBOLS AND ALERTS

Safety Symbols Explanation

GET TO KNOW YOUR DRILL PRESS

Parts Identification

Diagrams and labels identifying all parts of the drill press.

SPECIFICATIONS

ASSEMBLY AND ADJUSTMENTS

Attach Column to Base

Install Table onto Column

Install Drill Press Head onto Column

Mount the Drill Press

Instructions for securing the drill press to a workbench or mounting board.

Install the Chuck

Procedures for inspecting, cleaning, and seating the drill chuck onto the spindle.

Remove the Chuck

Steps for safely removing the drill chuck using wedges.

Belt Installation and Speed Adjustment

Guide to installing the belt and setting the correct spindle speed.

Align Belt Pulleys

Steps to ensure proper alignment of motor and spindle pulleys.

Raise, Lower, or Rotate Table

Tilt the Table

Square Table to Head

Drilling Depth Adjustment

Procedures for setting the drill depth using the stop nut mechanism.

Spindle Speeds

Belt/Pulley Position RPM Chart

Chart showing belt and pulley positions for different spindle speeds.

Drill Bit and Laser Installation

Install Drill Bits

Steps for inserting and tightening drill bits into the chuck.

OPERATION

Switches and Safety Key

Workpiece Support Guidelines

Guidance on using backup material or clamps for workpiece stability.

Drilling a Hole

Instructions on how to drill a hole, including feed rates and chip clearing.

Drilling to Specific Depths

Workpiece Method for Depth

Depth Scale Method for Depth

General Drilling Guidelines

Drilling Speeds Determination

Drilling Metal Safely

Drilling Wood Safely

Proper Bit Feeding Technique

MAINTENANCE

Cleaning, Storage, and Troubleshooting

Troubleshooting Common Problems

Solutions for common issues like starting or speed problems.