25
MAINTENANCE
Service
WARNING
Preventive maintenance performed by
unauthorized personnel may result in
misplacing of internal wires and components which could
cause serious hazard. We recommend that all tool service be
performed by a SKIL Factory Service Center or Authorized SKIL
Service Station.
General Maintenance
WARNING
When servicing, use only identical
replacement parts. Use of any other parts
could create a hazard or cause product damage.
Periodically inspect the entire product for damaged, missing, or
loose parts such as screws, nuts, bolts, caps, etc. Tighten securely
all fasteners and caps and do not operate this product until all
missing or damaged parts are replaced. Please contact customer
service or an authorized service center for assistance.
Cleaning
WARNING
The tool may be cleaned most effectively
with compressed dry air. Always wear
safety goggles when cleaning tools with compressed air.
Ventilation openings and switch levers must be kept clean and free
of foreign matter. Do not attempt to clean by inserting pointed
objects through openings.
WARNING
Certain cleaning agents and solvents
damage plastic parts. Some of these are:
gasoline, carbon tetrachloride, chlorinated cleaning solvents,
ammonia and household detergents that contain ammonia.
Storage
Store the tool indoors in a place that is inaccessible to children.
Keep it away from corrosive agents.
To Next Page
